3in1 Battery Meter/Balancer/Discharger LCD for Lipo & Li-Fe 2-6 Cell Batteries

The Voltage Meter balancer/Discharger is designed for Li-Po and Li-Fe batteries. It can measure battery voltage precisely and balance each cells voltage of a battery pack or discharge batteries in preparation for storage.
The balance function can be executed before or after the battery has been charged. I also can be done during the battery charging process, helping to ensure that the battery pack remains in excellent condition.
You can observe each cells' voltage in the battery pack individually. This helps identify abnormal or falling cells during the charging or discharging process.

Dimensions  
93.5 x 60 x 17mm

Voltage Limits    
Balance ports  LiPo - LiFe 2-6 cells
                Receiver slot   1.2v - 8.5v

Voltage power supply   
7.4v - 11.1v  JST port

Discharge / Balance current  
450mAh @ 4.2v

Discharge Voltage lower limit per cell
User adjustable between 2.00v and 4.00v (pre-set at 3.90v)

Balance Voltage Lower Limit per cell
User adjustable between 2.50v and 4.20v (pre-set at 3.30v)

Balance connections
JST-XH