With an extremely low price, this is also one of the highest quality r/c battery
charger you will ever find on the internet which also has USB PC monitor
software to perfectly charge all your batteries. Dual power and
multi-functional, the Sky Charger B6AC+ can charge 1-6 LiPo, A123 Li-Fe, NiMH
and NiCD, Li-ion and PB batteries! The Sky Charger B6AC+ also features
microprocessor controlled, high-power and high-performance circuit, maximum
safety with delta-peak sensitivity, capacity limit, processing time limit, input
power monitor, temperature limit and also monitoring the voltage of individual
cell. Best of all, this charger also comes with everything such as power
cord, charging clips/adaptors and everything you need to get started!
Great for RC beginners!!!
For the advanced user, the Sky Charger
includes a PC based program that can analyze and monitor the characteristic of
the battery through the computers USB port. The software will graph voltage,
current, capacity and temperature curves. It also shows the individual voltages
of each cell in the Lithium battery pack.
When charging or discharging, the Sky Charger offers an AUTO function that sets
the feeding current or the cell count of the Lithium battery automatically. For
Lithium batteries, this can prevent an over-charging situation which can lead to
an explosion should the user not set the program correctly. Every program in the
unit is programmed with safety monitoring to validate the user information to
ensure maximum safety. These parameters can be set by the user. The Sky Charger
also can monitor and balance individual cells of the Lithium battery pack during
the discharge process, as well as the charge process. If the voltage of any one
cell varies abnormally, the process will be stopped with the error message.
Includes AC Charger
Special Features
Optimized operating software B6AC+ features the so-called AUTO function that
set the feeding current during the process of charging or discharging.
Especially for Lithium batteries, it can prevent the overcharging which may lead
to an explosion due to the user's fault. It can disconnect the circuit
automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve
the maximum safety and minimize the trouble. All the settings can be configured
by users!
Internal independent lithium battery balancer
B6AC+ employs an individual-cell-voltage balancer. It isn t necessary to
connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, B6AC+ can monitor and balance each cell
of the battery individually. Error message will be indicated and the process
will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
B6AC+ is adaptable to various types of Lithium batteries, such as Li-ion,
LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, �fast� charge reduce the duration
of charging whereas �store� state can control the final voltage of your battery,
so as to store for a long time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on
the principle of the Delta-peak voltage detection. When the battery's voltage
exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your
NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and
capacity in the 'AUTO' charging mode.
Capacity limit
The charging capacity is always calculated as the charging current
multiplied by time. If the charging capacity exceeds the limit, the process will
be terminated automatically when you set the maximum value.
Temperature threshold*
The battery�s internal chemical reaction will cause the temperature of the
battery to rise. If the temperature limit is reached, the process will be
terminated.
*This function is available by connecting optional
temperature probe, which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its
voltage keeps being monitored. If it drops below the lower limit, the process
will be ended automatically.
Data store/load
The maximum five batteries�data can be stored for users�convenience. You can
keep the data pertaining to program setting of the battery of continuous
charging or discharging. Users can call out these data at any time without any
special program setting.